| 是否进口： | 否 | 厂家(产地)： | 中国 |
|---|---|---|---|
| 牌号： | MV00ASU | 用途级别： | 注塑 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | 1) | |||
| Tensile Stress, break | 131 | MPa | ASTM D638 | |
| Tensile Strain, break | 1.8 | % | ASTM D638 | |
| Tensile Modulus, 50 mm/min | 10440 | MPa | ASTM D638 | |
| Flexural Stress | 187 | MPa | ASTM D790 | |
| Flexural Modulus | 9340 | MPa | ASTM D790 | |
| Tensile Stress, break | 141 | MPa | ISO 527 | |
| Tensile Strain, break | 1.7 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 13870 | MPa | ISO 527 | |
| Flexural Stress | 214 | MPa | ISO 178 | |
| Flexural Modulus | 11140 | MPa | ISO 178 | |
| IMPACT | 1) | |||
| Izod Impact, notched, 23掳C | 208 | J/m | ASTM D256 | |
| Instrumented Dart Impact Energy @ peak, 23掳C | 13 | J | ASTM D3763 | |
| Multiaxial Impact | 13 | J | ISO 6603 | |
| Izod Impact, unnotched 80*10*4 +23掳C | 66 | kJ/m虏 | ISO 180/1U | |
| Izod Impact, notched 80*10*4 +23掳C | 29 | kJ/m虏 | ISO 180/1A | |
| THERMAL | 1) | |||
| HDT, 1.82 MPa, 3.2mm, unannealed | 157 | 掳C | ASTM D648 | |
| CTE, -40掳C to 40掳C, flow | 3.36E-05 | 1/掳C | ASTM E831 | |
| CTE, -40掳C to 40掳C, xflow | 4.57E-05 | 1/掳C | ASTM E831 | |
| CTE, -40掳C to 40掳C, flow | 3.37E-05 | 1/掳C | ISO 11359-2 | |
| CTE, -40掳C to 40掳C, xflow | 4.58E-05 | 1/掳C | ISO 11359-2 | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 134 | 掳C | ISO 75/Bf | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 160 | 掳C | ISO 75/Af | |
| PHYSICAL | 1) | |||
| Density | 1.35 | g/cm鲁 | ASTM D792 | |
| Mold Shrinkage, flow, 24 hrs | 3) | 0.13 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 3) | 0.28 | % | ASTM D955 |
| Density | 1.33 | g/cm鲁 | ISO 1183 | |
| INJECTION MOLDING | 2) | |||
| Drying Temperature | 80 | 掳C | ||
| Drying Time | 4 | Hrs | ||
| Melt Temperature | 220-250 | 掳C | ||
| Front - Zone 3 Temperature | 250-260 | 掳C | ||
| Middle - Zone 2 Temperature | 245-255 | 掳C | ||
| Rear - Zone 1 Temperature | 230-245 | 掳C | ||
| Mold Temperature | 40-65 | 掳C | ||
| Back Pressure | 0.2-0.3 | MPa | ||
| Screw Speed | 30-60 | rpm |
我公司长期提供【LNP VERTON MV00ASU 含有50%的长玻璃纤维】，如果您对我们的【LNP VERTON MV00ASU 含有50%的长玻璃纤维】感兴趣，请随时拨打下方的电话，点击留言或QQ与我交谈。联系我时，请说明是在供应商网上看到的，谢谢！
| 联系人 | 吴先生 |
|---|---|
| 手机 | 𐁂𐁃𐁂𐁄𐁅𐁆𐁆𐁇𐁆𐁇𐁃 |
