| 是否进口： | 否 | 厂家(产地)： | 中国 |
|---|---|---|---|
| 牌号： | VC130 | 用途级别： | 注塑 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| FLAME CHARACTERISTICS | 1) | |||
| UL Yellow Card Link | E45587-236843 | - | - | |
| UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 | |
| MECHANICAL | 2) | |||
| Tensile Stress, yield | 166 | MPa | SABIC - Japan Method | |
| Tensile Strain, break | 3 | % | SABIC - Japan Method | |
| Flexural Stress | 238 | MPa | ASTM D790 | |
| Flexural Modulus | 17460 | MPa | ASTM D790 | |
| IMPACT | 2) | |||
| Izod Impact, notched, 23掳C | 76 | J/m | ASTM D256 | |
| THERMAL | 2) | |||
| HDT, 0.45 MPa, 3.2 mm, unannealed | 205 | 掳C | ASTM D648 | |
| CTE, -30掳C to 30掳C | 5.00E-05 | 1/掳C | TMA | |
| Relative Temp Index, Elec | 1) | 75 | 掳C | UL 746B |
| Relative Temp Index, Mech w/impact | 1) | 75 | 掳C | UL 746B |
| Relative Temp Index, Mech w/o impact | 1) | 75 | 掳C | UL 746B |
| PHYSICAL | 2) | |||
| Specific Gravity | 1.5 | - | ASTM D792 | |
| Water Absorption, (23掳C/24hrs) | 0.07 | % | ASTM D570 | |
| Mold Shrinkage, flow, 3.2 mm | 4) | 0.1-0.2 | % | SABIC method |
| Mold Shrinkage, flow, 6.4 mm | 4) | 0.6-0.7 | % | SABIC method |
| INJECTION MOLDING | 3) | |||
| Drying Temperature | 120 | 掳C | ||
| Drying Time | 2-4 | Hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 235-255 | 掳C | ||
| Nozzle Temperature | 230-250 | 掳C | ||
| Front - Zone 3 Temperature | 235-255 | 掳C | ||
| Middle - Zone 2 Temperature | 230-250 | 掳C | ||
| Rear - Zone 1 Temperature | 225-245 | 掳C | ||
| Mold Temperature | 50-100 | 掳C | ||
| Back pressure (Plastic Pressure) | 3-8 | MPa | ||
| Screw speed (Circumferential speed) | 0.1-0.2 | m/s | ||
| Shot to Cylinder Size | 30-70 | % |
我公司长期提供【LNP STAT-KON Compound VC130】，如果您对我们的【LNP STAT-KON Compound VC130】感兴趣，请随时拨打下方的电话，点击留言或QQ与我交谈。联系我时，请说明是在供应商网上看到的，谢谢！
| 联系人 | 吴先生 |
|---|---|
| 手机 | 𐂭𐂮𐂭𐂯𐂰𐂱𐂱𐂲𐂱𐂲𐂮 |
