| 是否进口： | 否 | 厂家(产地)： | 中国 |
|---|---|---|---|
| 牌号： | RV00AEU | 用途级别： | 注塑 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | 1) | |||
| Tensile Stress, yield, 5 mm/min | 276 | MPa | ISO 527 | |
| Tensile Stress, break, 5 mm/min | 276 | MPa | ISO 527 | |
| Tensile Strain, yield, 5 mm/min | 2 | % | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 2 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 17800 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 366 | MPa | ISO 178 | |
| Flexural Strain, break, 2 mm/min | 3 | % | ISO 178 | |
| Flexural Modulus, 2 mm/min | 15000 | MPa | ISO 178 | |
| IMPACT | 1) | |||
| Izod Impact, unnotched 80*10*4 +23掳C | 90 | kJ/m虏 | ISO 180/1U | |
| Izod Impact, notched 80*10*4 +23掳C | 45 | kJ/m虏 | ISO 180/1A | |
| THERMAL | 1) | |||
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 259 | 掳C | ISO 75/Bf | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 256 | 掳C | ISO 75/Af | |
| PHYSICAL | 1) | |||
| Mold Shrinkage, flow, 24 hrs | 3) | 0.15-0.35 | % | ISO 294 |
| Mold Shrinkage, xflow, 24 hrs | 3) | 0.8 | % | ISO 294 |
| Density | 1.6 | g/cm鲁 | ISO 1183 | |
| Water Absorption, (23掳C/24hrs) | 0.9 | % | ISO 62-1 | |
| INJECTION MOLDING | 2) | |||
| Drying Temperature | 80 | 掳C | ||
| Drying Time | 4 | Hrs | ||
| Maximum Moisture Content | 0.15-0.25 | % | ||
| Melt Temperature | 290-305 | 掳C | ||
| Front - Zone 3 Temperature | 290-300 | 掳C | ||
| Middle - Zone 2 Temperature | 290-300 | 掳C | ||
| Rear - Zone 1 Temperature | 280-295 | 掳C | ||
| Mold Temperature | 95-110 | 掳C | ||
| Back Pressure | 0.2-0.3 | MPa | ||
| Screw Speed | 30-60 | rpm |
我公司长期提供【LNP VERTON RV00AEU 易于成型，紫外线稳定】，如果您对我们的【LNP VERTON RV00AEU 易于成型，紫外线稳定】感兴趣，请随时拨打下方的电话，点击留言或QQ与我交谈。联系我时，请说明是在供应商网上看到的，谢谢！
| 联系人 | 吴先生 |
|---|---|
| 手机 | 𐂀𐂀 |
