东莞市聚浩塑化有限公司 收藏

Zytel? SC315 NC010 NYLON RESIN PA612 典型数据加工方法注塑供货形式粒料添加剂脱模助剂产品

Zytel? SC315 NC010 is an unreinforced, lubricated 612 polyamide suitable for injection molding. It has been developed for applications such as parts for the healthcare industry.

SPECIAL CONTROL for HEALTHCARE APPLICATIONS
This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.  This product is also tested against *** 10993-5 and -11 and selected parts of USP Class VI.  For details, individual compliance statements are available from our representative.

Regulatory

Global Food Declaration regulatory.Global Food DeclarationRegulatory Information Sheet (RIS)SVHC DeclarationZYTEL - SVHC Statement Substance of Very High Concern Report  

总说明

Value测试方法树脂鉴别PA612*** 1043制品标识码>PA612<*** 11469***名称*** 16396-PA612,,M1G1NR,S10-020

流变性能

dry/cond.单位测试方法粘数.2630^[1]/*in?/lb*** 307, 1157, 1628模塑收缩率, 平行1.3/-%***  294-4, 2577模塑收缩率, 垂直1.4/-%***  294-4, 2577[1]: sulphuric acid 96%

机械性能

dry/cond.单位测试方法拉伸模量348091/246565psi*** 527-1/-2屈服应力8990/7830psi*** 527-1/-2屈服伸长率4.5/18%*** 527-1/-2名义断裂伸长率17/>50%*** 527-1/-2弯曲模量305000/209000psi*** 178简支梁无缺口冲击强度, +23°CN/Nftlb/in?*** 179/1eU简支梁无缺口冲击强度, -30°CN/19ftlb/in?*** 179/1eU简支梁缺口冲击强度, +23°C1.66/1.9ftlb/in?*** 179/1eA简支梁缺口冲击强度, -30°C1.66/1.43ftlb/in?*** 179/1eA悬臂梁缺口冲击强度, 23°C1.9/2.14ftlb/in?*** 180/1A悬臂梁缺口冲击强度, -30°C2.14/1.43ftlb/in?*** 180/1A洛氏硬度， R114/-*** 2039-2Poisson&＃39;s ratio0.38/0.42

热性能

dry/cond.单位测试方法熔融温度, 10°C/min424/*°F*** 11357-1/-3玻璃化转变温度, 10°C/min131/113°F*** 11357-1/-3热变形温度, 1.80 MPa144/*°F*** 75-1/-2热变形温度, 0.45 MPa275/*°F*** 75-1/-2维卡软化温度, 50°C/h 50N358/*°F*** 306线膨胀系数, 平行0.61/*E-4/°F*** 11359-1/-2线膨胀系数, 垂直0.667/*E-4/°F*** 11359-1/-2线膨胀系数, 垂直，-40-23℃0.5/*E-4/°F*** 11359-1/-2线膨胀系数, 垂直，55-160℃1/*E-4/°F*** 11359-1/-2线膨胀系数, 平行，-40-23℃0.5/*E-4/°F*** 11359-1/-2线膨胀系数, 平行，55-160℃0.889/*E-4/°F*** 11359-1/-2熔体0.18W/(m K)*** 22007-2熔体的比热2750J/(kg K)

燃烧性能

dry/cond.单位测试方法燃烧性－氧指数27/*%*** 4589-1/-2

电性能

dry/cond.单位测试方法相对介电常数., 100Hz3.6/5.1IEC 62631-2-1相对介电常数., 1MHz3.2/4IEC 62631-2-1介质损耗因子, 100Hz135/700E-4IEC 62631-2-1介质损耗因子, 1MHz160/400E-4IEC 62631-2-1体积电阻率1E13/1E11Ohm.mIEC 62631-3-1介电强度762/762kV/inIEC 60243-1相对漏电起痕指数600/-IEC 60112介电强度, 短期559/533V/milIEC 60243-1

其它性能

dry/cond.单位测试方法吸湿性, 2mm1.3/*%类似*** 62吸水性, 2mm3/*%类似*** 62密度8.85/-lb/gal*** 1183熔体密度56.2lb/ft?

VDA性能

Value单位测试方法有机化合物的排放3.1?gC/gVDA 277

注塑

Value单位建议干燥是干燥时间，除湿干燥机2 - 4h加工前水分含量≤0.15%***熔体温度482°F注塑  熔体温度446°F注塑  熔体温度554°F***模具温度158°F模具温度122°F模具温度194°F保压范围7250 - 14500psi保压时间0.102s/mil

薄膜挤出成型

Value单位干燥温度≤176°F干燥时间，除湿干燥机3 - 4h加工前水分含量≤0.06%***熔体温度464°F熔体温度范围455 - 482°F